Products >> Silicone Rubber Defrost Heater >>
Drain pipe heater flexible heater silicone rubber heater
Application Field for Silicon Rubber Drain Pipe Heaters
After the air cooler operates for some time, its blade will freeze, at the time, the antifreezing heating wire can be used for defrosting to let molten water discharge out of the refrigerator through the drain pipe.
As the front end of the drain pipe is installed in the refrigerator, defrosted water is frozen under 0°C to block the drain pipe, and heating wire is needed to install to ensure that defrosted water doesn't freeze in the drain pipe. The heating wire is installed in the drain pipe to defrost and heat the pipe at the same time to let water exhaust smoothly.
Characteristics for Silicon Rubber Drain Pipe Heaters
- Complete water-proof design
- Double-layer insulator
- Mould pressing knot, flexibility
- Silicon rubber insulator applicable scope: -60°C to +200°C
Technical Parameters of defrost drain pipe heater
|Heating Body||NiCr or Cu-Ni Alloy||Length/M||40W/M||50W/M|
|Tail End of Heating Body||Seal Tail End of Colloidal Silica||1||40W||50W|
|Maximum Surface Temperature||200°C||1.3||52W||65W|
|Minimum Surface Temperature||-60°C||1.5||60W||75W|
|Immergence Withstand Voltage||AC2500V V/min||2.0||80W||100W|
Generally, 50W/M drain pipe heating tape is rather common. When used for plastic drain pipe, the company recommends water pipe heating belt with output power of 40W/M.
Add: Hepanshan, Chengxi Industry Zone, Yiwu, Zhejiang, China